Schaeffler Middle East FZE

 
 
 
 
PUBLICATIONS
 

Brochure | 2010-04
Self-Adjusting Clutch (SAC)
Technology Special Tools / User Instructions

 
FURTHER INFORMATION

For more information, please visit our Library.

 
Special tools

Self Adjusting Clutch (SAC) - Special Tool

Using a special tool is an absolute must to ensure correct installation of the self-adjusting clutch.

No counteracting forces must be applied during installation to prevent early rotation of the adjusting ring in the clutch pressure plate.

For any questions concerning the SAC or the correct use of the special tool (part no. 400 0237 10) call our technical hotline at: +49 (0)1 801-753-333.

 
Depending on the flywheel’s hole pitch circle (six or eight screws) the pressure piece has to be modified using the corresponding spindle carrier.

Depending on the flywheel’s hole pitch circle (six or eight screws) the pressure piece has to be modified using the corresponding spindle carrier.

 
Use the 3-hole pitch on flywheels with six mounting threads, and the 4-hole pitch for flywheels with eight mounting threads. Use the 3-hole pitch on flywheels with six mounting threads, and the 4-hole pitch for flywheels with eight mounting threads.

Use the 3-hole pitch on flywheels with six mounting threads, and the 4-hole pitch for flywheels with eight mounting threads.